ez series ? compact design for low-profile applications; ratings from 5a to 18a @ 600 vac ? scr output for heavy industrial loads ? ac or dc control ? 1/4" fast-on terminals for easy installation ? ul/csa/vde approved, ce compliant to en60950-1 product selection control voltage 5a 12a 18a 4-15 vdc ez240d5 ez240d12 ez240d18 15-32 vdc eze240d12 eze240d18 90-140 vrms ez240a12 ez240a18 18-36 vrms eze240a12 eze240a18 4-15 vdc ez480d12 ez480d18 15-32 vdc eze480d12 eze480d18 90-140 vrms ez480a12 ez480a18 18-36 vrms eze480a12 eze480a18 available options output specifications (1) description 5 a 12 a 18 a 12 a 18 a operating voltage (47-63hz) [vrms] 24-280 24-280 24-280 48-660 48-660 transient overvoltage [vpk] 600 600 600 1200 1200 maximum off-state leakage current @ rated voltage [marms](5) 0.1 0.1 0.1 0.1 0.1 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 500 500 maximum load current (4) [arms] 5 12 18 12 18 minimum load current [marms] 150 150 150 150 150 maximum surge current (16.6ms) [apk] 40 150 200 150 200 maximum on-state voltage drop @ rated current [vpk] 1.5 1.5 1.5 1.5 1.5 thermal resistance juncti on to case (rjc) [c/w] 2 2 1.1 2 1.1 maximum i 2 t for fusing (8.3 msec) [a 2 sec] 95 95 170 95 170 minimum power factor (with maximum load) 0.5 0.5 0.5 0.5 0.5
input specifications (1) description ez240d5 ez240dxx ez480dxx ezexxxdxx ezxxxaxx ezexxxaxx control voltage range 4-15 vdc 3-15 vdc 4-15 vdc 15-32 vdc 90-140 vrms 18-36 vrms minimum turn-on voltage 4.0 vdc 3.0 vdc 4.0 vdc 15.0 vdc 90.0 vrms 18.0 vrms minimum turn-off voltage 1.0 vdc 1.0 vdc 1.0 vdc 1.0 vdc 10.0 vrms 2.0 vrms typical input current @ nominal voltage 13 madc 15 madc 15 madc 15 madc 10 madc 10 madc nominal input impedance 300 ohm 300 ohm 240 ohm 1500 ohm 10.6 k ohm 1.8 k ohm maximum turn-on time [msec] (6) 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle 10 10 maximum turn-off time [msec] 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle 40 40 general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(3) 4000 vrms * minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 1.5 oz (43 g) encapsulation thermally conductive epoxy terminals 0.25 inch faston general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) 240v, dc cont rol models only, all others 2500vrms 4) heat sinking required, see derating curves. 5) off- state leakage for snubbered version (suffix s) is 10.0marms 6) turn-on time for random turn-on versions is 0.1 msec (dc control models). * 240v, dc control models only wiring diagram
mechanical specifications dc control. pin 1: ac load pin 2: ac load pin 3: +dc control pin 4: -dc control note: recommended torque for mounting screw is 8 ? 14 in lb (1.1 ? 1.6 nm) this assumes a st andard # 8-32 unc screw thermal derate information agency approvals en60950 : meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: ul e1 16 95 0 csa l r81 68 9 vde 10139 u g (240 vdc control only) rev. 062210
annex - enviromental information
|
